A home fire alarm system is an important early-warning safety feature every house should have. However, if it malfunctions or its batteries are empty, the fire alarm in your home can start beeping, which can be a real nuisance. This is when the batteries need to be replaced or the alarm removed and fixed.
Some of these things you can do yourself, but it’s always safer to have professionals help you. Hire a company which has the required fire alarm testing certification in Orange County to be in charge of your fire alarm system.
Not only can you count on them for regular maintenance, but also for all the interventions. Besides, they will definitely know how to stop fire alarm beeping if it happens, so you don’t need to burden yourself with it.
How to stop fire alarm from beeping without battery?
If the smoke alarm in your Orange County home is beeping even after the battery has been removed, the system needs to be discharged. This is not as difficult as it sounds, but nevertheless, you might not want to do it without help.
Every smoke alarm in the house needs to first be dismounted from where it’s placed and its wires disconnected. After the batteries have been removed, push down the test button, discharging any leftover electricity from the unit, and the beeping should stop. Put new batteries and return every detector in its place.
Upon reconnecting everything, a green light should flash, indicating the system is operational. For cases of continued beeping, you should install new units.
How to disconnect fire alarm in your home?
When you need to disconnect a fire alarm in your home, you first need to determine whether it’s battery-powered or hardwired. Take the detector in your hand and twist it counterclockwise to remove it from where it’s mounted. Pull it away slowly and check if there are any wires connecting it to the wall or ceiling.
When there are no wires, it’s battery-operated and all you need to do is open it and remove the batteries. If there are wires, you first need to flip a circuit breaker which controls the alarm or temporarily switch off the main breaker. All that is left is to remove the alarm, but again, a professional is much better suited for this task.
How to remove fire alarm?
As mentioned above, disconnecting and removing a battery-operated alarm is somewhat easier than when you have a hardwired one. Safety is key when working with wires, so first power needs to be shut off for the alarm by flipping a circuit breaker. Then a voltage tester can be used to check the wires before actually touching them.
Separate the detector and the wires and use a screwdriver on screws holding the detector mounted to the wall or ceiling. Remove the mounting plate, taking care of when it will need to be put back again. Gently push the wires back into the hole so they don’t stand in the way until a new detector is installed. When disposing of the detector, check its label and mind the environment.
Commercial fire alarms systems. If you are experiencing any problems with commercial fire alarms, it is important that you call a dependable and certified fire protection company right away to fix the issue, don’t try to resolve it yourself.
Prime fire alarm service in Orange County
Anytime your home fire alarm system requires an intervention, Red Truck Fire & Safety Company is your go-to choice. We possess all the necessary fire alarm testing certification in Orange County to take the best care of any type of home fire detectors.
Whether you’re looking for fire alarm installation, maintenance or repairs, we provide it all. Enjoy yourself at the International Surfing Museum while we take care of the rest. Contact us at your convenience.